ELEGOO H1 HT seal for top cover latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a TPU seal for the Elegoo H1 HT to make it airtight and enable using it as a dry box
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Open Community License v1.1
This is a seal for the latch mechanism of the Elegoo H1 HT
The problem:
The H1 HT has automatically opening and closing vents for drying and storing, a seal between the cover and the body and desiccant storage within but as demonstrated in Tuba Makes's review (definitely watch his video, it's amazing),at minute 6:52, there is a huge leak near the latch.
when I looked at it myself, there is indeed a ~16 x 3mm hole for the latch mechanism.
The solution:
My solution was to create a simple seal to separate the latch from the rest of the chamber so you can use it as a dry box.
it doesn't require any hardware or glue, you just push it in and it stays in place.
Print settings:
⚠ The seal should be as close as possible to 5.32mm tall (+-0.05mm) so I recommend printing at 0.16mm layer height with the first layer at 0.2mm (0.16 x 32 + 0.2 = 5.32mm)
print with a smooth plate if you have one and enable ironing if possible, these will result in a better seal.
print in TPU (haven't tested PEBA),
no brim/mouse ears, the TPU sticks enough,
no support
enjoy 😉