1 / 4
ELEGOO H1 HT seal for top cover latch — image 1
1 / 4

ELEGOO H1 HT seal for top cover latch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a TPU seal for the Elegoo H1 HT to make it airtight and enable using it as a dry box

Rating
0 / 5
Likes
6
Downloads
27
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Open Community License v1.1

This is a seal for the latch mechanism of the Elegoo H1 HT

The problem:

The H1 HT has  automatically opening and closing vents for drying and storing, a seal between the cover and the body and desiccant storage within but as demonstrated in Tuba Makes's review (definitely watch his video, it's amazing),at minute 6:52, there is a huge leak near the latch.

when I looked at it myself, there is indeed a ~16 x 3mm hole for the latch mechanism.

The solution:

My solution was to create a simple seal to separate the latch from the rest of the chamber so you can use it as a dry box.

it doesn't require any hardware or glue, you just push it in and it stays in place.

Print settings:

⚠ The seal should be as close as possible to 5.32mm tall (+-0.05mm) so I recommend printing at 0.16mm layer height with the first layer at 0.2mm (0.16 x 32 + 0.2 = 5.32mm)

print with a smooth plate if you have one and enable ironing if possible, these will result in a better seal.

print in TPU (haven't tested PEBA), 

no brim/mouse ears, the TPU sticks enough,

no support

enjoy 😉

Tags