LabelNest — Gridfinity Dymo LabelWriter Spool Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5x5 Gridfinity tray that stores 4 Dymo LabelWriter spools neatly in place, ready to swap. Prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LabelNest — Gridfinity Dymo LabelWriter Spool Tray 5x5
Description
A Gridfinity-compatible tray for storing Dymo LabelWriter label rolls on their spool holders. Four recessed pockets follow the shape of the spool flange, and a center hole makes room for the spindle hub. Each spool sits flat, stable and ready to grab, so you can swap label rolls without searching through a drawer or tangling loose spools.
Features
5x5 Gridfinity-compatible base, slots straight into any Gridfinity baseplate
Holds 4 Dymo LabelWriter spools with label rolls mounted
Recessed pockets keep each spool centered and in place
Center hole accommodates the protruding spindle hub
Keeps all your label types visible and within reach
Single-part print, no assembly required
No supports needed
Requirements
Filament: PLA
Support Material: Not required — the model is designed to print cleanly without supports
Printing the Tray
Material: PLA
Supports: None needed
Layer Height: 0.2mm
Infill: 15–20% is sufficient for structural stability
Assembly
This is a single-piece print — simply set the tray onto your Gridfinity baseplate and place your Dymo spools in the pockets.
Did you print it? I'd love to see your setup! Please upload a make and leave a review to help others find this model.