drying/annealing basket for the Elegoo H1 HT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basket for drying silica gel and annealing stuff for the ELEGOO H1 HT
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of Calcifer's silica gel/annealing basket
Modifications :
I scaled it to fit the H1 HT better (it was a bit loose)
I made it reversible so you can turn it around because the heat comes only from one side
I made it work together with my latch seal model
I made it print in two parts to avoid using any supports
I increased the holding capacity a bit
I made it fit my neptune 4's small build plate (225x225 mm)
Print settings :
use a high temperature resistant material (at least 95°C/203°F, I used Elegoo ASA)
the large top part needs a brim or huge mouse ears; the bottom part doesn't need it
use a 0.6/0.8 nozzle (if you have one), otherwise it might take a long time
Assembly :
Just glue the two parts together.