MOLLE mount case for Pocket mesh node
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified outer case which allows the "cores" from the previous release to be mounted to MOLLE (PALS) gear.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As it says on the tin, this is for mounting your LoRa Mesh radio directly to your gear. It works with the internal or external antenna cores. Probably will not work on rigid MOLLE grids.
This is just the outer case and mounting tab. The core(s) and all relevant instructions are found in the original, here.
Can be printed without supports, but, as seen in the last pictures, a little support goes a long way. Strongly advise high-adhesion and/or higher temperature filaments (PETG at a minimum, I prefer ASA), and NOT carbon-filled, for RF reasons. Glass fiber should be fine, though.