1 / 1
Corsair Galleon 100 SD – Anti-Collapse Foot Lock & Slide Risers — zdjęcie 1

Corsair Galleon 100 SD – Anti-Collapse Foot Lock & Slide Risers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom cover lock that prevents the Corsair Galleon 100 SD tilt feet from accidentally collapsing when pushed forward.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hi everyone!

With this 3D model, I wanted to address one of the most annoying flaws of my current keyboard, the Corsair Galleon 100 SD (and no, sadly I can't do anything about its crazy price tag...).

I often need to push the keyboard forward while using the tilt feet, and without fail, they collapse on themselves. It forced me to flip the board over every single time just to prop them back up the hinge mechanism is just way too loose.

To solve this, I designed this riser/foot lock that stays gentle on your deskmat or desk surface. It minimizes friction when sliding the keyboard around without lifting it and prevents any accidental closing or scratching.

Print Settings & Tips:

  1. Orientation: I recommend printing them vertically, exactly as oriented in the uploaded files. This preserves the curved profile and ensures optimal layer adhesion and structural strength where it's needed most.

  2. Settings: Printed in PLA at 0.28 mm layer height with 30% infill.

  3. Supports: Because the bed contact surface is relatively small, I suggest adding supports at the top section, as well as a small brim or support under the main block for extra bed adhesion and stability during printing. Adjust according to your printer's bed adhesion and how much you trust your first layer! :P

That's all Folks!

Enjoy and happy printing! If you like this model, please leave a like and a comment with your makes.

Liked my model? Buy me a coffee or a beer to fuel my late night work on the next one!

Tagi