Replacement Disk for Bissell Spinwave
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement disk for mounting velcro pads to bissell spin mop.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
If your Bissell spinwave spinmop is no longer spinning, chances are the plastic disk that the pads attach to is stripped. This 3D printed part is a bolt-on replacement for the original. The velcro clips from the original piece are removed and clipped into the 3D printed one.
I recommend printing with at least 4 perimeters and 50% infill for the hub. The parts are a tight fit to prevent stripping like the original.
Please note when installing this part that the pad on the right (right hand side when you are using it) has a left-hand thread, that is "Righty loosey, Lefty Tighty".
Step File Included if modifications are needed.