Arduino Uno R3 Case - Snap-Fit Enclosure with Ventilation and Mounting Posts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective case for Arduino Uno R3. Snap-fit lid, ventilated sides and top, screw mounts, no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Protective enclosure designed for the Arduino Uno R3 and compatible boards.
This is the classic Uno case from my Maker Enclosure Collection - durable, functional, and easy to print. Designed to protect your board while keeping all ports fully accessible.
Features:
- Precise mounting posts for Arduino Uno R3 (4x M3 holes)
- Snap-fit lid with integrated clips - no screws for lid
- Full ventilation on both sides and top lid
- Lightweight bottom with organic airflow openings
- 2-part design, perfect fit out of the box
Optimized for FDM - no supports required.
Print Settings:
Material: PLA or PETG (PETG recommended for heat resistance)
- Layer height: 0.2mm
- Walls: 3 perimeters
- Top/Bottom: 3 layers
- Infill: 20% Gyroid
- Supports: NO
- Orientation: Flat side down (both base and lid as shown in render)