1 / 8
Mars Station Tray with Rover, Astronaut, Solar Cells, Drone and Landing Pod — zdjęcie 1
1 / 8

Mars Station Tray with Rover, Astronaut, Solar Cells, Drone and Landing Pod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a Multicolor Remix of the Mars Station for parking office stuff. Now with cute Accessories!

Ocena
0 / 5
Polubienia
71
Pobrania
75
Wydruki
0
Wyświetlenia
940
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I made this nice looking Base and accessories printable with only 4 colors.
The pictures are the actual Prints from my Core One INDX with 4 Tools.

The Surface of the solar cells are made with Colour Mix of 50% Silver and 50% Blue.
This gives this very nice shiny blue you know from real solar cells.

I used 4 Filaments:

  • 3DJake Wood Dark Brown

  • 3DJake EcoPla Blue

  • EXTRUDR Pla NX2 White

  • EXTRUDR Pla NX2 Silver

I Printed the tray it with 0,15mm Layers and 10% Infill.
The Accessories are printed with 0,10mm and a little bit lower temp.
That produces the nicest colourmix finish.

Little support is only needed at the small Receiver Station in the far left corner.

If you like it post a make!

Tagi