1 / 8
Mars Station Tray with Rover, Astronaut, Solar Cells, Drone and Landing Pod — image 1
1 / 8

Mars Station Tray with Rover, Astronaut, Solar Cells, Drone and Landing Pod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made a Multicolor Remix of the Mars Station for parking office stuff. Now with cute Accessories!

Rating
0 / 5
Likes
72
Downloads
76
Makes
0
Views
964
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I made this nice looking Base and accessories printable with only 4 colors.
The pictures are the actual Prints from my Core One INDX with 4 Tools.

The Surface of the solar cells are made with Colour Mix of 50% Silver and 50% Blue.
This gives this very nice shiny blue you know from real solar cells.

I used 4 Filaments:

  • 3DJake Wood Dark Brown

  • 3DJake EcoPla Blue

  • EXTRUDR Pla NX2 White

  • EXTRUDR Pla NX2 Silver

I Printed the tray it with 0,15mm Layers and 10% Infill.
The Accessories are printed with 0,10mm and a little bit lower temp.
That produces the nicest colourmix finish.

Little support is only needed at the small Receiver Station in the far left corner.

If you like it post a make!

Tags