1 / 2
GM Corvair Floor Plug for TPU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GM cars from 60s use these floor pan plugs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
GM cars from 60s and 70s have 1" holes in the floor pans requiring rubber plugs. Some cars require as many as 17 of them.
This requires softer Shore 85A or 90A TPU. The typical 95A is too stiff.
Print with 3 perimeters, 40% grid infill, 1.15 extrusion multiplier, and 50% speed for best results with the soft material.
To insert, press the curved side as far as possible into the hole with the sheet metal in the groove. Using a flat blade screwdriver, work around the perimeter to press the plug past the sheet metal until it fully pops into place.
