1 / 2
GM Corvair Floor Plug for TPU — image 1
1 / 2

GM Corvair Floor Plug for TPU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

GM cars from 60s use these floor pan plugs.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

GM cars from 60s and 70s have 1" holes in the floor pans requiring rubber plugs. Some cars require as many as 17 of them.

This requires softer Shore 85A or 90A TPU. The typical 95A is too stiff.

Print with 3 perimeters, 40% grid infill, 1.15 extrusion multiplier, and 50% speed for best results with the soft material.

To insert, press the curved side as far as possible into the hole with the sheet metal in the groove. Using a flat blade screwdriver, work around the perimeter to press the plug past the sheet metal until it fully pops into place.