Intel X540-T2 Ultra Low Profile 5010 Blower Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ultra low profile fan bracket for the Intel X540-T2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an ultra low profile bracket for attaching a GDSTIME 5010 blower fan to the fanless version of the Intel X540-T2 ethernet card, intended for cramped ITX servers with little to no space for a larger fan. The thinner version seats the fan 1mm lower to the card, but requires shorter 5mm screws to avoid shorting them on the board. The fitment is intended to be snug, so make sure you've calibrated your filament and be prepared to tweak the model size a bit. Tree supports must be enabled to print this.
The screws MUST be 6mm or shorter to not touch the card.
You'll also need to cut off the fan's JST plug and then solder or splice the wires into a 12v pc power plug of your choice.
fan: GDSTIME model GDB5010 12v
screws: two m3 x 6mm OR two m3 x 5mm (if using the thinner bracket)