Faux Claw MLOK forward handstop grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An open source handstop/stubby grip inspired by the DFCO tiger claw. STP and untextured model included.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DFCO Tiger Claw at home. Hence the faux claw. Originally printed in PA6CF but can reasonably be printed in PLA pro or similar material. MLOK compatible, printed originally on an 0.6mm nozzle but sliced in 0.4 for your convenience.
0.18 mm layer recommended for detail
high wall count
high infill if not consumed by walls
Supports required for internal surfaces if printed in orientation shown on photos or as oriented on the .3mf
requires hardware (no duh)
stp included here on printables
if using the untextured model you can take a soldering iron and stipple the grip like we used to back in the early 2010's.
Posting on makerworld/printables largely because I don't get enough visiblity on the sea. Modeled this in fusion as an STP because it I needed to open up the mlok mounting holes for the model but couldn't do it on account of it being an STL. If you want to make remixes or modifications to this, I recommend bumpmesh. It's free and you can use any image as your texture map.
Great to print and play with if you are interested in a tiger claw but don't want to spend the $20, OR if you just wanna print my free design.
update 10.06.26: Included additional variants with odysee page letters on it. Textured and untextured. The lettered branding fills that empty space a little better.