Sereed Baby Balance Bike Lowered Head Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified head tube which lowers the seat height for the Sereed Balance Bike.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the default seat height for the Sereed balance bike to be too high for my daughter, so I modified the head tube and lowered the insertion point of the top tube relative to the steering stem. This drops the height of the seat from ~10 to ~9 inches.
Because I was concerned about layer separation, I oriented the print along the long curved surface that faces the rider. Does this matter? Who knows, but I left that orientation as the default in the 3mf file since it's a pain to get right. If you do decide to use this orientation, it will require a bit of sanding.
Printer Settings:
Material: PETG (mainly for the color, I tested with PLA and that was fine as well)
Layer Height: 0.20mm
Supports: yes
Raft: 2 layers (recommended if you print in the weird orientation mentioned above)