Sereed Baby Balance Bike Lowered Head Tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified head tube which lowers the seat height for the Sereed Balance Bike.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the default seat height for the Sereed balance bike to be too high for my daughter, so I modified the head tube and lowered the insertion point of the top tube relative to the steering stem. This drops the height of the seat from ~10 to ~9 inches.
Because I was concerned about layer separation, I oriented the print along the long curved surface that faces the rider. Does this matter? Who knows, but I left that orientation as the default in the 3mf file since it's a pain to get right. If you do decide to use this orientation, it will require a bit of sanding.
Printer Settings:
Material: PETG (mainly for the color, I tested with PLA and that was fine as well)
Layer Height: 0.20mm
Supports: yes
Raft: 2 layers (recommended if you print in the weird orientation mentioned above)