Bender Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a Bender inspired soldering fume extractor. Uses a rocker switch, 12v power supply, 70mm fan and carbon…
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Created a Bender inspired soldering fume extractor. Uses a rocker switch, 12v power supply, 70mm fan and carbon filter. Be sure to get a high volume fan vs a quiet fan. My first attempt using a quiet fan it just didn't move enough air volume.
There are 2mm holes to use 16-20mm long screws. Screws are on the bottom to hold the teeth. 2 on the side, near the bottom to hold the base. 2 on the visor to attach to the head. Remaining parts should be downloaded from original diagram, which has a nice graphic of how things are put together. https://www.thingiverse.com/thing:4384974
I printed with tree supports for most of it just to keep the bridging to a minimum, but YMMV.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
15
Filament: Inland PLA+ PLA and PLA+ Silver, Black and White
Category: Electronics