Samsung Galaxy A37 5g TPU Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective tpu case/cover for a Galaxy A37
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this tpu cover for my wife's phone. 2mm thick on the sides and 3.1mm on the back to protect the cameras when placed down. Unlike my other phone covers, I haven't designed any supports in any of the openings for printing, so branch support recommended. This cover was printed in silk tpu to try and get a pearl look. Some black was left in the nozzle from the previous print so some first layer edges look grey. Tpu support came away reasonably easy, and I cleaned up any ugly bits with a knife and small drill. Personally I prefer printing these covers with zero top and bottom layers, 3 wall and a nice infill pattern. Print how you like. Enjoy!