Raspberry Pi Mount for Leviton Structured Media
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate for two Raspberry Pi in Leviton structured media panels.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A mounting plate for Raspberry Pi in the official case for Leviton structured media panels. I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives.
Uses the Leviton push-lock pins, but you could use wood screws and a washer if the panel was mounted on plywood.
The RPi cases can be attached to this plate with ¼" #4 wood screws.
Fusion 360 file provided for modification. The file is parameterized to hopefully make it easier to change width and height if needed.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Notes:
Doesn't need supports if printed flat with back on the build plate.