Raspberry Pi Mount for Leviton Structured Media
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for two Raspberry Pi in Leviton structured media panels.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 653
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A mounting plate for Raspberry Pi in the official case for Leviton structured media panels. I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives.
Uses the Leviton push-lock pins, but you could use wood screws and a washer if the panel was mounted on plywood.
The RPi cases can be attached to this plate with ¼" #4 wood screws.
Fusion 360 file provided for modification. The file is parameterized to hopefully make it easier to change width and height if needed.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Notes:
Doesn't need supports if printed flat with back on the build plate.