Wera Toolcheck Plus Skadis Holster, v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated version of my existing Toolcheck holder. This version is now angled forward 5 degrees for easier access.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A neat little holster for mounting the Wera Toolcheck Plus to an Ikea Skadis pegboard.
This is an improved version with a forward tilt of 5 degrees for easier stowage and removal.
PRINTING
There are 3 version to choose from;
Glued in logo - print the letters separately and glue them in. The logo has about 0.2mm clearance. (still a very fiddly job though). This is the model in the photographs.
Multi-material print - the logo is a separate body you can assign a different filament/toolhead to, similar to above but with 0.0mm clearance.
Embossed Logo - the logo is only embossed, no separate bodies to deal with (except for below)
I've also saved some 'tags' to better secure the lower hooks during printing as separate bodies in the STEP file (red, below).
Print it exactly as it is and cut the tags off after printing.
If you have confidence in your bed adhesion, you can simply delete these bodies in the slicer.
Either way, make sure you enable supports for the hooks!