AntHead TZV6 Heater Block — +1.5mm Boss (Clone Revo Clearance Fix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thickened TZV6 heater-block mounting boss (+1.5mm) so the nozzle sits lower
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
AntHead TZV6 Heater Block - +1.5mm Boss (Clone Revo Clearance Fix)
This is a remix / modified reference file, based on the AntHead toolhead by PrintersForAnts, licensed GPL-3.0. Go build the actual toolhead from their repo; this upload just increases clearance for shorter v6 style nozzles
The problem
I'm running this hotend: E3D Hotend Kit For E3D Revo Hotend Kit V6 (affiliate link)
Cheap AliExpress "Revo-style" V6 hotends like this one are shorter than a standard v6. Which results in the fan ducts hitting the bed before the nozzle made contact.
What I changed
The TZV6 heater-block reference model's mounting boss (the 5-hole bolt-circle face, not the extruder-mount face) is extruded outward 1.5mm along its own normal. This pushes the modeled nozzle tip 1.5mm lower relative to the fixed mount point. Nothing else on the part changed: top mount face, nozzle bore, and outer dimensions are bit-for-bit identical to the original reference file.
Does this fix it?
It gets me printing without the duct crashing into the bed. I don't have a genuine E3D V6 nozzle to confirm the number is exactly right for the real part too so treat 1.5mm as "probably-good-enough for this clone hotend," Its not a verified universal fix. If your clearance is already fine, or you're still crashing after this, check your own stack-up before copying the value blindly.
Credit
Base toolhead: PrintersForAnts/AntHead (GPL-3.0)
This remix only touches the TZV6 reference geometry for clone-hotend clearance checking.
