Basketball pins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small basketball pin.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A small basketball pin.
The model is printed flat and only requires a standard pin post and clutch to turn it into a wearable pin.
Bill of Materials
You will need:
Instructions
Each pin consists of:
1 printed basketball
1 pin post/back
1 pin clutch
Assembly is very simple, you only need to glue the pin post to the center of the back of the printed part. Let the glue dry and add the pin clutch.
Make sure the surfaces are clean before gluing, and avoid using too much glue as it may spread around the pin post.
Coloring
The model is designed for easy multi-color printing using height-based color changes (manual color swap friendly).
Printing recommendations
Use a 0.2 mm or 0.4 mm nozzle for the best results.
Use the Hilbert Curve as the top surface pattern to give the ball a basketball-like texture.
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.