WIP - Neutral Labs Della (Scrooge Expansion Module)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another simple build to use with Neutral Labs' Scrooge, the malfunction sequencer/generator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This build sends out 8 functions from Scrooge to use with the rest of your modular synth or external gear.
Just print the faceplate, insert and fasten 8 jacks and ill talk about some approaches to wiring next.
Wiring Option 1: The quick way
Take a 10pin power cable and chop off one side.
Wire up the cables to the jacks, referencing the diagram in the photo below.
***Wiring Option 2: The secure way. ***WIP*** (ill update with more detailed instructions later)
Youll need some vero board, 2x5 Male headers, wire and a 10pin to 10pin power cable.
Use vero board and connect it to the jacks
Connect the 2x5 Male Header
Wire up each jacks tip to the corresponding pin on the male header
Wire up the GND of each jack to the 2x5 headers 2 middle pins
Be sure that you plug the other side of the cable into Scrooge the right way, otherwise the signals will be coming out of the wrong jacks on Della