Replacement for Honda CR-V first generation Glove Box Hinge & Mount Replacement — 77515-SZ3-A02
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse-engineered glove box hinge and mount for a 2000 Honda CR-V, replacing Honda part 77515-SZ3-A02. first gen crv
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A replacement glove box hinge and mount reverse-engineered from the original component on my 2000 Honda CR-V.
This project recreates the part’s mounting and hinge geometry in Fusion 360 to provide a printable repair option for a damaged or missing component.
Compatibility
• Designed around a 2000 Honda CR-V.
• Reference Honda part number: 77515-SZ3-A02.
• Compare your original part and mounting points with the listing photos before printing for another model or year. this is made for the first gen 1997 to 2001
Design
• Modeled from measurements of the original component.
• Intended for repairing the glove box hinge/mount.
• Independently designed replacement; not a genuine Honda-manufactured part.
Print and installation details will be added with the finished model files and photos.
uses original hardware and pin
no support printed mine in pla and haven't seen any major warping even in 90+ heat however your millage may vary, if you are concerned i recommend some kind of temp resistant filament happy printing