The People's Companion - Affordable DIY Mesh Node - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the original with fewer faces, and added features
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This uses all the parts from the original, and you can add a BMS if you choose.
This is the BMS that I used (1S 3.7V 3A Li-ion BMS Protection Board for 18650)
I added the BMS to allow the use of unprotected 18650s. The Xaio chip has a very basic charging circuit and won't protect against over- or under-voltage, so you could kill your battery if it isn't protected.
The changes:
Made room for the aforementioned BMS
Added a small lip around the power switch to help prevent accidentally pressing the switch
Created a thinned out section of the case so that the activity LED has a chance to show through if you are using a dark filament