1 / 4
The People's Companion - Affordable DIY Mesh Node - Remix — image 1
1 / 4

The People's Companion - Affordable DIY Mesh Node - Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of the original with fewer faces, and added features

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This uses all the parts from the original, and you can add a BMS if you choose. 
This is the BMS that I used (1S 3.7V 3A Li-ion BMS Protection Board for 18650)

I added the BMS to allow the use of unprotected 18650s. The Xaio chip has a very basic charging circuit and won't protect against over- or under-voltage, so you could kill your battery if it isn't protected. 

The changes:

  • Made room for the aforementioned BMS

  • Added a small lip around the power switch to help prevent accidentally pressing the switch

  • Created a thinned out section of the case so that the activity LED has a chance to show through if you are using a dark filament

Tags