Secure 2.5" SSD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy, easy-to-print mounting bracket for standard 2.5" SSDs. Keeps drives cool and cables organized.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This SSD mount provides a reliable way to secure your drive while keeping cable management tidy and ensuring adequate airflow. Whether you are expanding a custom home automation server, organizing a workstation, or mounting a drive to the underside of a desk, this low-profile bracket keeps everything firmly in place.
Features:
Accurate hole spacing for standard 2.5" SATA SSDs.
Minimalist design optimized for fast printing and low material usage.
Countersunk mounting holes for a flush, professional finish.
Print Instructions:
Filament: PETG is highly recommended for its durability and temperature resistance near warm electronics, though PLA is perfectly fine for open-air desk setups.
Layer Height: 0.20mm
Infill: 15% - 20% (Gyroid recommended)
Supports: No supports required when oriented flat on the build plate.
Perimeters: 3 perimeters for added structural strength around the screw holes.
Hardware Required (Bill of Materials):
4x countersunk wood screws or M3/M4 bolts (for mounting the bracket to your surface of choice)