SV06 Plus Leadscrew Axial Roller / Thrust Bearing Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lets you fit axial roller bearings onto the leadscrews of the SV06 Plus.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The lower washer mount is press-fit into the stock motor mount. The mounts have some clearance for the motor shaft; the bearing and upper washer are allowed to shift around by about 1mm. This is intentional, we do not want to grip things and add friction.
Print settings:
100 vertical perimeters (this forces circular 100% infill. These are tiny, don't worry about filament use. We want good compressive strength).
Re-orient the parts appropriately. No supports.
I recommend printing in PETG.
Bearing dimensions:
ID (Inner Diameter / Bore): 8mm
OD (Outer Diameter): 19mm
H (Total Height): 2mm
Bearing type search keywords (I got mine off of Amazon):
AXK0819 Axial Roller Bearing with Washers 8mm Hole 19mm AD 2mm Thickness Thrust Bearing
