SV06 Plus Leadscrew Axial Roller / Thrust Bearing Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lets you fit axial roller bearings onto the leadscrews of the SV06 Plus.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The lower washer mount is press-fit into the stock motor mount. The mounts have some clearance for the motor shaft; the bearing and upper washer are allowed to shift around by about 1mm. This is intentional, we do not want to grip things and add friction.
Print settings:
100 vertical perimeters (this forces circular 100% infill. These are tiny, don't worry about filament use. We want good compressive strength).
Re-orient the parts appropriately. No supports.
I recommend printing in PETG.
Bearing dimensions:
ID (Inner Diameter / Bore): 8mm
OD (Outer Diameter): 19mm
H (Total Height): 2mm
Bearing type search keywords (I got mine off of Amazon):
AXK0819 Axial Roller Bearing with Washers 8mm Hole 19mm AD 2mm Thickness Thrust Bearing
