Sovol SV06(+) reverse bowden filamentsensor on toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mash-up from 2 existing models i already used before. but now i combined so it sit nicely on the toolhead
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After not finding what I really wanted, I decided to make my own filament sensor. I mixed two existing models and came up with this.
I printed it with a 0.6 mm nozzle, a 0.15 mm layer height, and a 0.5 mm outer wall thickness to get enough detail for the M10 threads. A 0.4 mm nozzle with standard settings will do just fine.
There is no need for supports.
Assembly: When installing the switch, use a small piece of filament and Bowden tube to check the actuation point for the switch, as different switches tend to have different clicking positions. Then glue it down with some superglue (I used the screw holes to drop in the glue).
I have two versions: for those who use the pins on the toolhead (mirrored) and for those who use the pins on the control board (normal).