McNobbin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sculpted shifterknob for Thrustmaster TH8S named the McNobbin.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
The McNobbin - just a simple gearshifter for the Thrustmaster TH8S
Sculpted in Fusion 360, aprox. 130mm tall
The parts have been split in a funky way to preserve threads and remove need for support if oriented correctly.
Positioning pins are split to give good adhesion to printbed, they should be installed using superglue but with a 0,1mm clearance-fit they can work without glue depending on print quality.
Testprinted in ASA at 0,2mm layerheight, sliced in prusaslicer at speed preset with 15% infill on a completely stock Prusa Core one
Print 2x of each plug as they are equal halves
Original design was a bit slim, you can choose between Fat McNobbin and regular McNobbin, same pegs for both