Clip-on SpaceOne FPV 220x arm guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arm guards for SpaceOne FPV 220x. Can't name them motor guards as they almost do not protect the motors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Arm guards for SpaceOne FPV 220x. Can't name them motor guards as they almost do not protect the motors.
Clips right onto the arms, can be fastened using zip ties (but not really needed).
Designed with integrated support, as the supports generated by the splicer I use did not work for me. Remove the support by prying with a tiny flat screwdriver and pulling.
Update 07/01/2017: added version without supports
Print settings (important!):
layer height: 0.1 or 0.2 mm (because of the dimensions)
Infill : 100% (well it's a guard)
walls: 1 (don't use 2 walls, can result in partially empty print on some slicers)
floor and roof thickness : 0 (to avoid wrong filling pattern resulting in weak part)
fly safe
Print instructions
Category: R/C Vehicles