Clip-on SpaceOne FPV 220x arm guards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arm guards for SpaceOne FPV 220x. Can't name them motor guards as they almost do not protect the motors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Arm guards for SpaceOne FPV 220x. Can't name them motor guards as they almost do not protect the motors.
Clips right onto the arms, can be fastened using zip ties (but not really needed).
Designed with integrated support, as the supports generated by the splicer I use did not work for me. Remove the support by prying with a tiny flat screwdriver and pulling.
Update 07/01/2017: added version without supports
Print settings (important!):
layer height: 0.1 or 0.2 mm (because of the dimensions)
Infill : 100% (well it's a guard)
walls: 1 (don't use 2 walls, can result in partially empty print on some slicers)
floor and roof thickness : 0 (to avoid wrong filling pattern resulting in weak part)
fly safe
Print instructions
Category: R/C Vehicles