Wurkkos TS15 Vello-Folding-Bike Clip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on holder for the Wurkkos TS15 designed to mount on the base of the handlebar stem clamp of a Vello folding bike.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Wurkkos TS15 Stem-Clamp Clip for VELLO Folding Bikes
Clip-on holder for the Wurkkos TS15 (or similar), designed to mount on the base of the handlebar stem clamp of a VELLO™ folding bike.

Description
This holder lets you use the Wurkkos™ TS15 as a bicycle light on a VELLO™ folding bike by clamping it directly onto the base of the handlebar stem clamp — the collar where the stem riser enters the frame.
The part has two distinct faces:
one side is contoured to match the VELLO™ frame at the stem-clamp base, so it sits flush and cannot rotate
the other side clips the Wurkkos™ TS15, and is sized to also accept the flash-light with its optional pocket-clip fitted
The whole body is twisted by 29°, giving the light an optimal beam angle onto the street while still sitting neatly on the frame.
It is held in place with a zip-tie, together with the Vello™ Mount Counterpart (Zip-Tie Holes, without Latch), so it cannot slide downwards while riding.
The design was made in FreeCAD, and the editable source model is included so it can be adjusted, remixed, or used as a basis for other lamp holders.
Included Models in .3mf
Vello™ Mount Counterpart with Zip-Tie Holes and without Latch use this to fix the zip-tie in place on your Vello™ Bike and avoid it sliding down.
see also
Wurkkos TS15 Flashlight Torch Shade Clip - Bicycle Ready - recommended to avoid blinding oncoming traffic.
Features
Tested and improved over several days
Holder for the Wurkkos™ TS15 flash-light and any future one using the same clip.
Makes the TS15 usable as a bicycle light on a VELLO folding bike
Mounts on the base of the handlebar stem clamp
Contoured to the VELLO frame on one side — no rotation, no sliding
Accepts the TS15 with or without the pocket-clip
29° twist for an optimal beam angle onto the street. (took a while to get this right)
Zip-tie mounting with the Vello™ zip-tie counterpart
Removable mounting concept
FreeCAD source file included
Printing
Material: PETG or PCTG recommended. Using a dark color make parts more UV resistant and last longer outdoors.
Infill: None or Default or 20% Lightning
Support: none
Brim: none
Nozzle Size: 0.4mm or 0.6mm or 0.8mm
Wall loops: 4 on 0.4mm nozzle. 3 on 0.6mm nozzle, 2-3 on 0.8mm nozzle
Orientation: see
.3mf
Assembly
place the clip onto the base of the handlebar stem clamp, contour side against the frame.
thread a zip-tie through the clip and the Vello™ Mount Counterpart and tighten it so the part cannot slide downwards.
clip the Wurkkos TS15 into the holder (pocket-clip optional).
Sidenote: Improving the TS15
The TS15, as shipped, had a bit too much of a hard center spot for me.
To make it optimal for my use-cases I sanded the lens in a circular pattern. Not it acts as a diffusor and gives a more gradual cone of light.
How? Basically I just cut out a circular pice of sanding paper, put the light on it and rotate it until I was satisfied.
This is part of a set of flash-light mounts

FreeCad Source File
Please upload your remixes here and/or post suggestions.
To make it easier for you to remix or make small modifications, I always upload the FreeCAD source for my models.
License
Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0
Share with others
Don't keep your modifications to yourself
Always attribute the source!