1 / 6
Wurkkos TS15 Vello-Folding-Bike Clip Mount — image 1
1 / 6

Wurkkos TS15 Vello-Folding-Bike Clip Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip-on holder for the Wurkkos TS15 designed to mount on the base of the handlebar stem clamp of a Vello folding bike.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Wurkkos TS15 Stem-Clamp Clip for VELLO Folding Bikes

Clip-on holder for the Wurkkos TS15 (or similar), designed to mount on the base of the handlebar stem clamp of a VELLO™ folding bike.

Description

This holder lets you use the Wurkkos™ TS15 as a bicycle light on a VELLO™ folding bike by clamping it directly onto the base of the handlebar stem clamp — the collar where the stem riser enters the frame.

The part has two distinct faces:

  • one side is contoured to match the VELLO™ frame at the stem-clamp base, so it sits flush and cannot rotate

  • the other side clips the Wurkkos™ TS15, and is sized to also accept the flash-light with its optional pocket-clip fitted

The whole body is twisted by 29°, giving the light an optimal beam angle onto the street while still sitting neatly on the frame.

It is held in place with a zip-tie, together with the Vello™ Mount Counterpart (Zip-Tie Holes, without Latch), so it cannot slide downwards while riding.

The design was made in FreeCAD, and the editable source model is included so it can be adjusted, remixed, or used as a basis for other lamp holders.

Included Models in .3mf

see also

Features

  • Tested and improved over several days

  • Holder for the Wurkkos™ TS15 flash-light and any future one using the same clip.

  • Makes the TS15 usable as a bicycle light on a VELLO folding bike

  • Mounts on the base of the handlebar stem clamp

  • Contoured to the VELLO frame on one side — no rotation, no sliding

  • Accepts the TS15 with or without the pocket-clip

  • 29° twist for an optimal beam angle onto the street. (took a while to get this right)

  • Zip-tie mounting with the Vello™ zip-tie counterpart

  • Removable mounting concept

  • FreeCAD source file included

Printing

  • Material: PETG or PCTG recommended. Using a dark color make parts more UV resistant and last longer outdoors.

  • Infill: None or Default or 20% Lightning

  • Support: none

  • Brim: none

  • Nozzle Size: 0.4mm or 0.6mm or 0.8mm

  • Wall loops: 4 on 0.4mm nozzle. 3 on 0.6mm nozzle, 2-3 on 0.8mm nozzle

  • Orientation: see .3mf

Assembly

  1. place the clip onto the base of the handlebar stem clamp, contour side against the frame.

  2. thread a zip-tie through the clip and the Vello™ Mount Counterpart and tighten it so the part cannot slide downwards.

  3. clip the Wurkkos TS15 into the holder (pocket-clip optional).

Sidenote: Improving the TS15

The TS15, as shipped, had a bit too much of a hard center spot for me.

To make it optimal for my use-cases I sanded the lens in a circular pattern. Not it acts as a diffusor and gives a more gradual cone of light.

How? Basically I just cut out a circular pice of sanding paper, put the light on it and rotate it until I was satisfied.

This is part of a set of flash-light mounts

FreeCad Source File

Please upload your remixes here and/or post suggestions.

To make it easier for you to remix or make small modifications, I always upload the FreeCAD source for my models.

License

Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0

  • Share with others

  • Don't keep your modifications to yourself

  • Always attribute the source!

Tags