SKÅDIS Quarter-Turn Locking Accessory Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool-free locking mounts for IKEA SKÅDIS, with 12 swappable accessories and the STEP file for creating your own designs.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Secure interchangeable accessories to your IKEA SKÅDIS pegboard with a tool-free locking mount.
I designed this system for setups where accessories need to stay attached without relying on gravity—including angled or horizontal pegboards, portable panels, and vehicle storage.
The system has two separate connections: a quarter-turn anchor secures the base to the pegboard, while a quarter-turn adapter lets you attach and swap accessories without removing the base.
12 interchangeable accessories are included for organizing tools, cables, headphones, and more. A STEP file of the connector plate is also provided so you can integrate the quarter-turn interface into your own custom accessory designs.
Features
Designed for IKEA SKÅDIS pegboards.
Tool-free installation and removal.
Locking base stays attached while accessories are exchanged.
Reusable quarter-turn interface for different holders.
No screws, nuts, or additional mounting hardware required.
Installation
Slide the rear mounting hook into the dovetail slot on the back of the mounting plate until fully seated.
Insert the hook into a pegboard slot and seat the mounting plate against the board.
Insert the locking anchor through the lower opening and corresponding pegboard slot.
Turn the lever 90° along the locking ramp until seated. The horizontal lever indicates the locked position.
Insert a compatible accessory into the upper socket and rotate it 90° to lock.
To swap accessories, rotate the accessory back to its release position and lift it out. The mounting plate can remain locked to the pegboard.
Make Your Own Accessories
Use the included connector plate STEP file to create custom cable organizers, tool holders, containers, strap mounts, and other accessories.
For angled boards or moving installations, choose holders that also secure their contents.
Print Settings
Material: PLA or PETG
Infill: 15%
Layer height: 0.12 mm recommended for smooth locking operation
Supports: Rrequired
If using a multicolor printer, use your slicer’s paint tool to color the stop markers in a highly visible color, such as yellow, red, or the lime green shown in the photos.
Print one mounting plate, one rear mounting hook, one locking anchor, and your selected accessory. Custom accessories may require different print settings.
Optional Hardware
The magnet holder and reusable cable tie mount use the following items:
Links are provided for reference; equivalent items can be used if they fit the accessories.
Related Model
Also check out my SKÅDIS Quarter-Turn Locking Board Connectors for joining adjacent pegboards using the same hand-operated locking approach.
Share your makes and any accessories you design—I’d like to see how you expand the system!