1 / 4
House-Style Enclosure for Apollo Automation ESK-1 (SCD40 & SEN65)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom house-themed 3D-printable enclosure designed for the Apollo Automation ESK-1 (ESPHome Starter Kit).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Required Hardware / Components
Apollo Automation ESK-1 (ESPHome Starter Kit)
Apollo Automation SCD40 CO₂ Sensor Module
Sensirion SEN65 All-in-One Environmental Sensor
Connecting Ribbons/Wires: Standard ESK-1 ribbon cables and JST connector harnesses. I used 150mm
M3 x 8 mm Screws: For lid to base connection. I hot glued the boards down.
