Halloween Skeleton Lantern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chubby little skeleton lantern with a "reveal when lit" effect.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A chubby little skeleton lantern with a "reveal when lit" effect. By day its shell stays smooth and only the skull shows, with its eye sockets, triangular nose and teeth, under a tiny top hat. Slip an LED tea light in through the arch at the back and the bones appear through the translucent wall: sternum, ribs, spine, pelvis and shoulder blades.
Bones are carved from the inside only, so the outside stays perfectly smooth
Supports in critical areas only
Size: about 105 × 107 × 148 mm
100 mm round base with two different-sized pegs (6 and 8 mm), so it can only be assembled one way
Three files: the figure, the base, and the whole lantern as a single piece
Printed on an Anycubic Kobra X in PLA
LED tea lights only, never a real flame. White, natural or light-colored filament gives the best glow.
Slicer settings
Nozzle: 0.40 mm
Layer height: 0.20 mm
Walls: 3
Infill: gyroid, 5–10%
Supports: critical areas only
Seam position: aligned to the rear