Halloween Skeleton Lantern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A chubby little skeleton lantern with a "reveal when lit" effect.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A chubby little skeleton lantern with a "reveal when lit" effect. By day its shell stays smooth and only the skull shows, with its eye sockets, triangular nose and teeth, under a tiny top hat. Slip an LED tea light in through the arch at the back and the bones appear through the translucent wall: sternum, ribs, spine, pelvis and shoulder blades.
Bones are carved from the inside only, so the outside stays perfectly smooth
Supports in critical areas only
Size: about 105 × 107 × 148 mm
100 mm round base with two different-sized pegs (6 and 8 mm), so it can only be assembled one way
Three files: the figure, the base, and the whole lantern as a single piece
Printed on an Anycubic Kobra X in PLA
LED tea lights only, never a real flame. White, natural or light-colored filament gives the best glow.
Slicer settings
Nozzle: 0.40 mm
Layer height: 0.20 mm
Walls: 3
Infill: gyroid, 5–10%
Supports: critical areas only
Seam position: aligned to the rear