Chatterbox NoPixel Lenticular 6 color print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two pictures in one, this has Chatterbox with his full mask and his iconic half mask
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
This was created using a tool called Lentic: https://github.com/krickatthedisco/lentic/releases
Lentic was developed using Cursor, but the images used to make this artwork are simply posterized screenshots from Twitch.
Must be printed at 100% infill, 0.2mm layer height, with a 0.4mm nozzle. To customize your own Lenticular print visit the link above, install Lentic, and use your own images.
The example print in the images was 200mm x 200mm, the attached one to this print is a higher resolution 250mm x 250mm and will look nicer.
Do not scale the print, it will cause the "crest line" to print erratically instead of straight in its own layer.