Chatterbox NoPixel Lenticular 6 color print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two pictures in one, this has Chatterbox with his full mask and his iconic half mask
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
This was created using a tool called Lentic: https://github.com/krickatthedisco/lentic/releases
Lentic was developed using Cursor, but the images used to make this artwork are simply posterized screenshots from Twitch.
Must be printed at 100% infill, 0.2mm layer height, with a 0.4mm nozzle. To customize your own Lenticular print visit the link above, install Lentic, and use your own images.
The example print in the images was 200mm x 200mm, the attached one to this print is a higher resolution 250mm x 250mm and will look nicer.
Do not scale the print, it will cause the "crest line" to print erratically instead of straight in its own layer.
