Cord Organizer for Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your desk cables neat and organized with this simple, compact, 3D-printable cord organizer.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Desk Cord Organizer / Cable Management Strip — 13-Slot
Keep your workspace clean, organized, and clutter-free with this 13-slot desk cord organizer. Designed to keep charging cables, USB cords, display cables, and other wires neatly positioned and within easy reach.
The organizer features retention-fit cable slots that help prevent cables from slipping off the edge of your desk when disconnected. It also includes recessed countersunk mounting holes for secure screw installation, with the option to use heavy-duty double-sided mounting tape for a quick, tool-free installation.
📑 Table of Contents
✨ Features
13 Dedicated Cable Slots
Organize multiple charging cables, USB cables, display cables, and other desk wires in one compact strip.Cable Retention Lips
The curved slot openings help hold cables securely in place and prevent them from falling through when disconnected.Two Mounting Options
Install the organizer using screws through the recessed mounting holes, or use heavy-duty double-sided mounting tape for a simpler installation.Recessed Screw Mounting
The mounting holes are designed to accommodate 3.5 mm screws while keeping the screw heads recessed for a cleaner finish.Low-Profile Design
With a compact 150 × 20 × 20 mm footprint, the organizer fits neatly along the back edge, front edge, or underside of a desk.Easy Cable Access
Keep your most frequently used cables organized and easily accessible instead of letting them fall behind or underneath your desk.
📐 Technical Specifications
Specification | Dimension |
|---|---|
Overall Length | 150 mm |
Overall Width | 20 mm |
Overall Height | 20 mm |
Number of Cable Slots | 13 |
Cable Slot Width | 3 mm |
Mounting Hole Diameter | 3.5 mm |
Mounting Hole Spacing | 50 mm |
Mounting Hole Type | Recessed / Countersunk |
Cable Slot Size
The 3 mm cable slots are intended for common charging and data cables, including many:
USB-C cables
Lightning cables
Micro-USB cables
Braided charging cables
Small USB cables
Other similarly sized wires
Note: Actual compatibility depends on the diameter and flexibility of your specific cable.
🔩 Mounting Options
Option 1 — Screw Mounting
For a more permanent installation, use screws through the 3.5 mm recessed mounting holes.
This is recommended when installing the organizer on a solid desk surface or another suitable mounting surface.
🖨 Print Settings & Recommendations
Setting | Recommended Value |
|---|---|
Material | PLA, PETG, or ABS |
Layer Height | 0.20 mm |
Infill | 15–20% |
Infill Pattern | Gyroid or Grid |
Wall Loops | 2 |
Seam Position | Random |
Supports | Not required |
Print Orientation | Bottom side down |
Supports
No supports are required.
The model is designed to print flat on the build plate with the bottom surface facing downward.
🧵 Recommended Materials
The organizer can be printed using PLA, PETG, or ABS.
PLA: Easy to print and ideal for normal indoor desk use.
PETG: Recommended if you want increased durability and flexibility.
ABS: Suitable for applications requiring greater heat resistance.
For most desktop applications, PLA or PETG should work well.
💡 Notes
Check your cable diameter before printing if you are using unusually thick or rigid cables.
For a stronger permanent installation, screw mounting is recommended.
For removable installation, heavy-duty double-sided mounting tape can be used.
Print a small test section first if you are unsure whether a specific cable will fit the 3 mm slots.
Designed as a simple, practical solution for keeping your workspace clean, organized, and cable-free.