Belt Calibration Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A belt calibration test designed to help check the accuracy and performance of a 3D printer’s belt-driven motion system.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
What is it for?
This test can be used to check:
X/Y dimensional accuracy
Belt tension and movement
Layer alignment
Mechanical accuracy
Repeatability of your printer’s motion system
Printing
Recommended settings:
Material: PLA
Layer height: 0.2 mm
Infill: 15–20%
Walls: 3
Supports: None
Brim: Not required
The model is approximately 89 × 89 × 72 mm.
Notes
Print the test and compare the finished dimensions with the intended dimensions. If the measurements are noticeably different, check your printer’s belt tension, pulleys, stepper settings and mechanical alignment.
This model is intended as a simple calibration/testing tool and may need to be adjusted depending on your printer and calibration method.
If you find this useful, consider leaving a 👍 or posting your make!