Brinkmann 810-4220-S Gas Grill Replacement Burner Control Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact replacement burner-control knob for the Brinkmann 810-4220-S two-burner gas grill.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact replacement burner-control knob designed for the Brinkmann 2-Burner Red Gas Grill, model 810-4220-S.
The low-profile design includes a rounded grip for turning the control and a D-shaped mounting socket. It uses less than 1 meter of filament, even at 100% solid infill, making it a small, inexpensive repair print.
I printed mine in PLA and have tested it successfully on my grill.
Compatibility and socket dimensions
Designed for the Brinkmann 810-4220-S. Other grills have not been tested.
The mounting socket was modeled from an 8.46 mm diameter circle, with a flat positioned 2.17 mm inward from the circular edge. Compare your control shaft and socket depth before trying it on another grill.
Printing
• Tested material: PLA.
• Filament usage: less than 1 meter at 100% infill.
• Print at the original scale to preserve the shaft fit.
Installation and use
Align the D-shaped socket with the burner-control shaft. Check that the knob fits securely, moves through the required control range, and allows the valve to return fully to OFF.
The successful PLA test reflects my own use; it does not establish long-term heat resistance. Check for softening, looseness, or deformation during use. if you experience any troubles related to pla being outside or warping under heat i would recommend asa or abs