Hexagon Push-Pin Wall Shelves — Standard, Tapered & Two-Tier.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagonal display shelves mounted with thumbtacks, with standard, tapered, two-tier, and large variants.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A family of hexagonal wall shelves I designed for displaying small collectibles, figurines, and decorations.
As a renter, I wanted shelves that could mount with small thumbtacks instead of larger screw holes. Each design includes two mounting points. I use flat-head steel thumbtacks pressed into drywall and have added extra tacks—up to six in my installations—for additional support.
Choose from full hexagons, tapered versions with more open space above the shelf, and divided versions with an additional middle shelf.
Versions and usable dimensions
• Standard full hexagon: shelf base approximately 93.5 mm wide × 77 mm deep, with 162 mm internal height.
• Tapered hexagon: shelf base approximately 93.5 mm wide × 77 mm deep, with sides that taper to leave the upper area mostly open.
• Two-tier hexagon: bottom shelf approximately 93 mm wide × 77 mm deep, with 78 mm clearance beneath the middle shelf. The middle shelf is approximately 200 mm wide × 43 mm deep, with mostly open space above it.
• Large hexagon: usable shelf base approximately 138 mm wide × 113 mm deep. This version is sized for a 300 × 300 mm printer bed.
All other versions fit my standard Ender 3 S1 print bed. Check the model’s footprint in your slicer before printing.
The standard full hexagon offers enough height for many standard unboxed collectible figures. Check the figure’s width, depth, accessories, and base against the usable dimensions.
Mounting
Each shelf has two mounting points with holes approximately 6.457 mm in diameter and 3.5 mm deep.
I use Mr. Pen silver flat-head steel thumbtacks from the 500-pack, pressed into drywall. Alternative tacks need a head larger than the mounting hole, along with a suitable pin length and secure grip in your wall.
Screws with suitable heads and wall fixings can also be used if larger holes are acceptable.
These shelves have worked well in my own drywall installations, but I have not established a measured load capacity. Start with lightweight display items and check that the shelf and fasteners remain secure. Thumbtacks leave small holes.
Print settings
• Material: PLA
• Nozzle: 0.4 mm
• Layer height: standard profile for your printer
• Supports: none required for the ordinary shelf variants
The watch and jewelry holders are separate designs in the same hexagonal storage family.