1 / 6
Clutter Catcher v2 Core One L — zdjęcie 1
1 / 6

Clutter Catcher v2 Core One L

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a little clutter catcher for the Core One L

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Redesigned from the ground up a catch all/clutter catcher for the Core One L

This "will" interfere with one of the right side or left side nozzle wiper add ons that are out there when you print at full height.  Most of us are not commonly printing at 330mm on the Z so it will be ok most of the time but you use at your own risk.

You will need...

Two M3x6mm screws.  Preferably socket cap.  8mm also works.

Optional...

Four 19.4mm x 1.6mm Magnets (I ordered 20x2mm off of AliExpress but they're actually 19.4x1.6mm)

The screws are just to align the clutter catcher so that is doesn't interfere with the bed when you get to max height, they screw into the factory holes of the printer.  See last picture for placement (blue circles).

.15mm layers, PETG, I like fuzzy skin on the outside walls but did not include it on the 3MF.  Supports are designed into the print, if you're using the magnets the supports will pop right out of the print and you can glue magnets in their place.

The clutter catcher is designed to fit around the "Prusa Core One and One L Z-Axis Dust Cover" by EC found here...  

Tagi