1 / 6
Clutter Catcher v2 Core One L — image 1
1 / 6

Clutter Catcher v2 Core One L

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Just a little clutter catcher for the Core One L

Rating
0 / 5
Likes
2
Downloads
1
Makes
0
Views
51
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Redesigned from the ground up a catch all/clutter catcher for the Core One L

This "will" interfere with one of the right side or left side nozzle wiper add ons that are out there when you print at full height.  Most of us are not commonly printing at 330mm on the Z so it will be ok most of the time but you use at your own risk.

You will need...

Two M3x6mm screws.  Preferably socket cap.  8mm also works.

Optional...

Four 19.4mm x 1.6mm Magnets (I ordered 20x2mm off of AliExpress but they're actually 19.4x1.6mm)

The screws are just to align the clutter catcher so that is doesn't interfere with the bed when you get to max height, they screw into the factory holes of the printer.  See last picture for placement (blue circles).

.15mm layers, PETG, I like fuzzy skin on the outside walls but did not include it on the 3MF.  Supports are designed into the print, if you're using the magnets the supports will pop right out of the print and you can glue magnets in their place.

The clutter catcher is designed to fit around the "Prusa Core One and One L Z-Axis Dust Cover" by EC found here...  

Tags