1 / 3
Front Fender for GoPed ESR 750 EX electric scooter — zdjęcie 1
1 / 3

Front Fender for GoPed ESR 750 EX electric scooter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-piece front fender for the GoPed ESR 750 EX, designed for strength and minimal supports.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

A custom front fender for the GoPed ESR 750 EX electric scooter. The original scooter does not have a front fender.

The fender is split into two parts, joined with three M3 screws (25–30 mm). This design minimizes the amount of support material required while maintaining good structural strength.

The fender is mounted using standard plumbing pipe clamps and M6 screws, making it possible to install it without specialized hardware.

Hardware required:

  • 3× M3 screws, 25–30 mm

  • Plumbing pipe clamps

  • M6 screws

Tagi