1 / 3
Nerf Strongarm Rail Addon — zdjęcie 1
1 / 3

Nerf Strongarm Rail Addon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Bottom Rail Addon For The Nerf Strongarm

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Here's a question: you have a Nerf Strongarm. You have multiple attachments to go on it. Do you want one or two rails?

Well, I know which one I would choose...

This model uses glue to secure it to the blaster. DO NOT GLUE IT TO BOTH SIDES OF THE BLASTER, otherwise you will not be able to disassemble it (at least non-destructively). What I did is I put glue only on one side, and secured the rail there. That's plenty strong for me.

Reference measurements are below. Please let me know if you need any specific measurements.

If there is any problems with this model, or if you have ideas about how to make this model better, feel free to send me a message!

Tagi